20oz straight stainless tumbler for a wrap or a decal.
Starts as white and changes to a different color in the sun!
Product Instructions:
Oven Settings
Temperature: 395°F
Time: 6 - 7 Minutes
(test in your oven for accurate time)
- Attach reversed printed image to tumbler with thermal tape
- Place tumbler in heat shrink bag or silicone wrap
- Place in oven preheated to 400°F for approximately 6 - 7 minutes (test to determine best timing!)
- Afterwards, remove heat shrink bag / silicone wrap and paper immediately
- Allow the tumbler to cool completely before use
Mug Press (10oz, water bottle element)
Press Temperature: 325°F
Time: 150 - 165 Seconds
Pressure: Light
- Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
- Place tumbler in press at the press temperature, and close the element around the tumbler
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 - 30 seconds
- Once done, remove the tumbler from the press and remove the transfer paper immediately
- Allow the tumbler to cool completely before use